Pioneer VSX-1020 - Manual (Page 11)

Controls and displays 02
11
En
English
Français
Deutsch
Nederlands
Italiano
Español
4 MULTI-ZONE
Lights when the MULTI-ZONE feature is active
(page 72).
5 SOUND
Lights when any of the Midnight, Loudness or
tone controls feature is selected (page 67).
Lights when Dialog Enhancement is switched
on.
6 PQLS
Lights when the PQLS feature is active (page 65).
7 S.RTRV
Lights when the Sound Retriever function is
active (page 68).
8 Listening mode indicators
AUTO SURROUND – Lights when the Auto
Surround feature is switched on (page 56).
ALC – Lights when the ALC (Auto level
control) mode is selected (page 59).
STREAM DIRECT – Lights when Direct/
Pure Direct is selected (page 59).
ADV.SURROUND – Lights when one of the
Advanced Surround modes has been
selected (page 58).
STEREO – Lights when stereo listening is
switched on (page 58).
STANDARD – Lights when one of the
Standard Surround modes is switched on
(page 56).
9 (PHASE CONTROL)
Lights when the Phase Control is switched on
(page 61).
10 Analog signal indicators
Light to indicate reducing the level of an analog
signal (page 74).
11 Tuner indicators
TUNED – Lights when a broadcast is being
received.
STEREO – Lights when a stereo FM broadcast
is being received in auto stereo mode.
MONO – Lights when the mono mode is
set using
MPX.
12
Lights when the sound is muted (page 13).
13 Master volume level
Shows the overall volume level.
“
---” indicates the minimum level, and “+12dB”
indicates the maximum level.
14 Input function indicators
Light to indicate the input function you have
selected.
15 Scroll indicators
Light when there are more selectable items
when making the various settings.
16 Speaker indicators
Indicates the speaker terminal,
A and/or B, to
which audio signal output is currently set
(page 72).
17 SLEEP
Lights when the receiver is in sleep mode
(page 74).
18 Matrix decoding format indicators
2PRO LOGIC IIx – This lights to indicate
2 Pro Logic II / 2 Pro Logic IIx decoding
(page 56).
Neo:6 – When one of the Neo:6 modes of
the receiver is on, this lights to indicate
Neo:6 processing (page 56).
19 Character display
Displays various system information.
20 Remote control mode indicator
Lights to indicate the receiver’s remote control
mode setting. (Not displayed when set to
1.)
(page 76)
VSX-1020_UC.book 11 ページ ２０１０年１月７日 木曜日 午後６時０分