Fluke 179 - Manual (Page 10)

Models 175, 177 & 179
Users Manual
6
Making Basic Measurements
The figures on the following pages show how to make basic
measurements.
When connecting the test leads to the circuit or device, connect
the common (COM) test lead before connecting the live lead;
when removing the test leads, remove the live lead before
removing the common test lead.
XW Warning
To avoid electric shock, injury, or damage to the Meter,
disconnect circuit power and discharge all high-voltage
capacitors before testing resistance, continuity, diodes,
or capacitance.
Measuring AC and DC Voltage
_ + _ +
Volts AC Volts DC Millivolts DC
V
V
mV
RANGE HOLD MIN MAX RANGE HOLD MIN MAX RANGE HOLD MIN MAX
AIK03F.EPS
Measuring Resistance
RANGE HOLD MIN MAX
AIK04F.EPS
Measuring Capacitance
+
_
+
RANGE HOLD MIN MAX
AIK05F.EPS