Standard equipment, Safety information – Fluke 725 User Manual

Page 13

Advertising
background image

Standard Equipment

3

Standard Equipment

The items listed below and shown in Figure 1 are included
with your calibrator. If the calibrator is damaged or
something is missing, contact the place of purchase
immediately. To order replacement parts or spares, see
the user-replaceable parts list in Table 9.

TL75 test leads (one set)

AC70A alligator clips (one set)

Stackable alligator clip test leads (one set)

725 Product Overview Manual

725 CD-ROM (contains Users Manual)

Spare

fuse

Safety Information

The calibrator is designed in accordance with IEC1010-1,
ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 1010.1-
92. Use the calibrator only as specified in this manual,
otherwise the protection provided by the calibrator may be
impaired.

A Warning identifies conditions and actions that pose
hazard(s) to the user; a Caution identifies conditions and
actions that may damage the calibrator or the equipment
under test.

International symbols used on the calibrator and in this
manual are explained in Table 2.

Advertising