Fluke 77 - Manual (Page 45)

77 Series III
Service Manual
4-4
4-5. Manual Status Information
The following Manual Status Information table defines the assembly revision
levels that are documented in the manual. Revision levels are printed on the
component side of each pca.
Manual Status Information
Assembly Revision Level
A1 Main PCA c
4-6. Parts Lists
The following tables list the replaceable parts for the 77 Series III Multimeter.
Parts are listed by assembly; alphabetized by reference designator. Each
assembly is accompanied by an illustration showing the location of each part
and its reference designator. The parts lists give the following information:
•
Reference designator
•
An indication if the part is subject to damage by static discharge
•
Description
•
Fluke stock number
•
Total quantity
•
Any special notes (i.e., factory-selected part)
Caution
A * symbol indicates a device that may be damaged
by static discharge.
Note
This instrument may contain a Nickel-Cadmium battery. Do
not mix with the solid waste stream. Spent batteries should be
disposed of by a qualified recycler or hazardous materials
handler. Contact your authorized Fluke service center for
recycling information.
Warning
This instrument contains a fusible resistor (pn
740662). To ensure safety, use exact replacement
only.