Viewing memory data – Fluke 189 User Manual

Page 67

Advertising
background image

Using Memory & Communications Features

Viewing Memory Data

4

4-3

Viewing Memory Data

Use the following procedure to view memory data:

Note

Viewing memory data involves turning the rotary
switch from its current function. Selections are
not retained when you turn the switch. To return
the meter to this function after viewing memory
data, note the function and the enabled
selections before you turn the rotary switch.

1. Disconnect the input leads at the measurement

source.

W

Warning

To avoid electric shock, disconnect the test
leads at the measurement source prior to
viewing memory data.

2. Turn the rotary switch to the VIEW MEM position.

3. The primary display shows memory data. Refer to

Figure 4-1 for an explanation of the VIEW MEM
display.

4. If the primary display data is a logged reading,

;

appears in the display. You can switch between the
two types of memory data.

Press

R

(SAVE) for saved reading.

Press

D

(LOGGING) for logged reading

To view more detailed logged reading information,
use FlukeView Forms software.

5. The index (lower left corner of the display) identifies

the displayed memory data by number. You can view
additional memory data by pressing

[

and

]

.

6. Repeat steps 4 and 5 to switch between the two types

of memory data.

7. To exit viewing memory, turn the rotary switch to any

other position. Remember that the meter returns to
the default selections for the new function position.

Advertising