Introduction, Contacting fluke, Safety information – Fluke 289 User Manual

Page 11: Xw warning

Advertising
background image

1

Introduction

XW

Warning

Read “Safety Information” before using this Meter.

The descriptions and instructions in this manual apply to the
model 289 and model 287 True-rms Digital Multimeters
(hereafter referred to as the Meter). The model 289 appears in all
illustrations.

Contacting Fluke

To contact Fluke, call:

USA: 1-888-993-5853
Canada : 1-800-363-5853
Europe : +31 402-675-200
Japan: +81-3-3434-0181
Singapore : +65-738-5655
Anywhere in the world: +1-425-446-5500
Visit Fluke's web site at:

www.fluke.com

Register your Meter at:

http://register.fluke.com

Safety Information

The Meter complies with:

ANSI/ISA 82.02.01 (61010-1) 2004

UL 61010B (2003)

CAN/CSA-C22.2 No. 61010-1-04

IEC/EN

61010-1

2

nd

Edition Pollution Degree 2

EMC EN 61326-1

Measurement Category III, 1000V, Pollution Degree 2

Measurement Category IV, 600 V, Pollution Degree 2

In this manual, a Warning identifies hazardous conditions and
actions that could cause bodily harm or death. A Caution
identifies conditions and actions that could damage the Meter,
the equipment under test, or cause permanent loss of data.

XW

Warning

To avoid possible electric shock or personal
injury, follow these guidelines:

Use this Meter only as specified in this
manual or the protection provided by the
Meter might be impaired.

Do not use the Meter if it is damaged. Before
you use the Meter, inspect the case. Look for
cracks or missing plastic. Pay particular
attention to the insulation surrounding the
connectors.

Advertising
This manual is related to the following products:

287