Error messages – Fluke 289 User Manual

Page 66

Advertising
background image

287/289
Users Manual

56

Error Messages

Table 10 list some of the error messages the Meter may display and the conditions that may be causing the error.

Table 10. Error Messages

Message Conditions

Leads connected incorrectly.

Lead in A or mA/

μ

A jack but

rotary switch not in corresponding A/mA or

μ

A

position

.

Leads in both A and mA/

μ

A jacks.

Rotary switch set to measure current but no lead in either A or mA/

μ

A jack.

Open Thermocouple

Thermocouple wire is open or thermocouple junction is corroded.
No Thermocouple connected to the Meter’s input.

Batteries low – function
unavailable.

The function selected requires a higher battery level to operate within specifications.

Error: Date and Time need to be
reset.

Batteries were left out too long and the Meter’s date and time were lost.

Not enough memory for
operation.

When starting a recording session or saving screen data, the Meter does not have
enough memory to store the information.

Batteries critically low, replace
now.

Battery is too low to make measurements within stated specifications. The Meter will turn
off within 15 seconds after this message appears to preserve the Meter’s date and time.

Advertising
This manual is related to the following products:

287