Uniden BCD396XT - Manual (Page 109)

Friday, November 07, 2008 109
Turn [Scroll Control] to focus the cursor on the band you want to change. Then, press [E / yes / gps] to
enter the modulation setting menu.
The following modulation setting values will be shown.
AM
set the current band as AM modulation
NFM set the current band as NFM modulation
FM set the current band as FM modulation
WFM set the current band as WFM modulation
FMB set the current band as FMB modulation
Turn [Scroll Control] to select the value, press [E / yes / gps] to set the selection and go to the Step Setting
menu.
Selectable step values are:
5.0 kHz
6.25kHz
7.5kHz
8.33kHz
10.0 kHz
12.5 kHz
15.0 kHz
20.0 kHz
25.0 kHz
50.0 kHz
100.0 kHz
Turn [Scroll Control] to select the value, press [E / yes / gps] to set the selection and return to the Band
Defaults setting menu.
P25 LP Filter
This option can be used to activate the P25 Low Pass Filter feature.
On P25 Low Pass Filter on
Off P25 Low Pass Filter off
Press [E / yes / gps] key to accept the selection and return to the previous menu.