Uniden BCD396XT - Manual (Page 140)

Friday, November 07, 2008 140
[FUNC] key
Press this key to go to Function Mode with a 3-second timeout. The scanner displays the system number
tag and channel number tag. If you do not press a key within 3 seconds, function mode is automatically
cancelled.
Long press this key to go to Function Mode without a timeout.
For P25 Systems, pressing [FUNC] causes the scanner to display the WACN ID instead of the System ID on
the first line.
Function Mode
[Scroll Control] knob
Turn this knob to quickly select a system.
[Scan / srch] key
Press this key to display the prompt for starting Quick Search.
If the current system is a conventional system or search range:

Press [E / yes / gps] to start Quick Search.

Press [. / no / pri] to go to Search for....

Press [L/O] to cancel this prompt.

Press [Hold / ] to go to Quick Search Hold Mode for the current frequency.

If the current system is a trunked system:

Press [E / yes / gps] to start ID Search.

Press [. / no / pri] to go to Search for....

Press [L/O] to cancel this prompt.

Press [Hold / ] to go to Scan Hold Mode.
[Hold / ] key
Press this key to toggle Close Call functions.
Long press this key to start Close Call Only Mode.
[L/O] key
Press this key once to temporarily lock out a system or a search range. When the scanner is turned off, this
is unlocked.
Press this key twice in a second to lockout a system or a search range. When the scanner is turned off, this
remains locked out.
Long press this key to turn on all Quick Key settings for systems / Sites, and unlock all systems and search
ranges.
Long press this key to display the prompt “Unlock All Systems?” for unlocking all systems, sites, search
ranges and Close Call Hits system and enable all Quick Keys for all system/sites.
Press [E / yes / gps] to unlock all data.
Press [. / no / pri] to return to the previous mode without unlocking.