Uniden BCD396XT - Manual (Page 148)

Friday, November 07, 2008 148
Custom Search Range Select :
You can select the range by turning [Scroll Control] in Function Mode. When the scanner returns to Normal
Mode, it searches from the selected range.
If you select a range that is turned off, the scanner turns on the range and starts searching from the range.
Custom Search in Control Channel Only Mode
This is valid only for Custom ranges that have the C-CH Only setting turned on at Set C-Ch Only. And this
function tracks Motorola and LTR.
The scanner searches only for control channels. If a received transmission is not a control channel,
searching resumes immediately.
Receive Motorola Control Channel:
The scanner starts trunking. Acquired TGIDs are displayed. The first line displays the system name and
system ID name/ID in turn. The second line displays the TGID. The C-Ch frequency is displayed in the line
under the TGID display.
If you have set the correct band plan for the received control channel at Set MOT BandPlan, the scanner
will automatically track voice calls on the system.
The scanner toggles the following display while receiving signals.
Scanner displays system name.
Scanner displays system ID.
If no ID exists, it displays "I D: - - - - - - - - ".
Custom 1
I D: 6432
851. 0125
1 2 3 4 5 6 7 8 9 0
Grand Prai ri e
I D: 6432
851. 0125
1 2 3 4 5 6 7 8 9 0
Custom 1
I D: 6432
851. 0125
1 2 3 4 5 6 7 8 9 0
SI D: 1615h
I D: 6432
851. 0125
1 2 3 4 5 6 7 8 9 0