Close call only, Close call, 6750mhz – Uniden BCD396XT User Manual

Page 160: Cc found, Press any key

Advertising
background image

Friday, November 07, 2008

160

Close Call Only

The scanner performs this by menu at Close Call Only. Or, long press [Hold /

] in function mode to

perform this quickly.

The scanner only tries to find a Close Call transmission.

“Close Call” will be displayed on the first line and the Close Call meter is displayed in the second line. This
meter indicates the transmission signal level of each band.

If the scanner has already received a Close Call hit and you press [Hold /

], the scanner holds on the

latest Close Call hit frequency. Or if it has not yet received a Close Call hit, the keypress is ignored and the
scanner sounds an Error Tone.

Press the number keys from [1 / sr1] to [7 / att] to switch each band on or off. You can also use the menu
to turn bands on or off. See Set CC Bands.

If the scanner gets a Close Call hit, the scanner displays "CC Found!" and "Press Any Key". And the band
number that the found close call belongs to blinks.

Press any key to see and hear the found frequency.

Press [Hold /

] to go to Close Call Hold Mode.

In Close Call Only Mode, press [Menu] in Function Mode to go to Close Call Menu at Close Call.

Close Call

462. 6750MHz

NFM

Close Call


1 2 3 4 5 6 7

CC Found!

Press Any Key

1 2 3 4 5 6 7

Advertising