Uniden BCD396XT - Manual (Page 163)

Friday, November 07, 2008 163
When the scanner monitors or holds on a Close Call transmission, press [E / yes / gps] to quickly store the
current frequency.
While monitoring a Close Call frequency, if you turn [Scroll Control], the scanner goes to Quick Search Hold
Mode with the frequency.
Key Operation During Close Call Only Mode
Normal Mode
[Scroll Control] knob
While monitoring a frequency, turn this knob to resume close call searching.
[Scan / srch] key
Press this key to go to Scan Mode.
[Hold / ] key
If the scanner has already received a Close Call hit, press this key to hold on the frequency.
If not, the scanner will sound an Error Tone.
[L/O] key
While monitoring a frequency, press this key to temporarily lock out the current frequency. When the
scanner is turned off, the frequency is unlocked.
Press this key twice in a second to permanently lock out the current frequency. When the scanner is
turned off, the frequency stays locked out.
Long press this key to unlock all frequencies that are locked out in Search Mode and Close Call Mode.
[1 - 7] key
Press these keys to turn on/off each Close Call Band. This operation also can be done in menu Set CC
Bands.
[E / yes / gps] key
While monitoring a frequency, press this key to quickly store the current frequency.
[Menu] key
Press this key to go to the Menu Mode at Top Menu.
Function Mode
[Scan / srch] key
Press this key to display the prompt for starting Quick Search.
The scanner displays the prompt. Press [E / yes / gps] to start Quick Search, press [. / no / pri] to go to
Menu Mode at Search for..., press [L/O] to cancel the prompt or press [Hold / ] to go to Quick Search
Hold Mode.