Priority for location alert, Gps operation during scanner display, Registration of location information – Uniden BCD396XT User Manual

Page 184: Road 0. 500mi

Advertising
background image

Friday, November 07, 2008

184

Priority for Location Alert

When a Location Alert with a higher priority occurs during a Location Alert, the current Location Alert is
canceled and the scanner alerts for the Location with the high priority.

The priority order is as follows:

1)

Dangerous Road

2)

Dangerous Xing

3)

Point of Interest

GPS Operation during Scanner Display

If a Location Alert occurs when the scanner is displaying the scanner screen, the scanner displays the
Location Alert data in reverse type on the bottom line and the Alert Light turns on. The scanner displays
the direction of the Location Alert, Location Alert system type and the distance to the Location Alert.









During the Location Alert, the scanner carries out the Location Alert operation with the scanner operation
display. When the Location Alert operation finishes, the scanner returns to the usual scanner display.

Registration of Location Information

You can store current location data and the heading value by long pressing [E / yes / gps] key in Function
Mode.

The moment you press [E / yes / gps] key in Function Mode, the scanner holds the current location data.

Then the scanner displays the dialog for selecting a location type. By pressing [E / yes / gps] for type
selection, registration is completed and the name and location of stored location are displayed.

The stored data is named as “T YYMMDD hhmmss” that shows a type, date and the time.

Note: ”T” means location system type. (P : POI / R : DRD / X : DXG) “YY” means year. “MM” means month.
“DD” means day. “hh” means hour. “mm” means minute. “ss” means second.

For example, when a default name is “X 091020 102554”, the system type is Dangerous Xing and was
stored in 2009/10/20 10:25:54.

However, if the connection of GPS Unit is invalid, the scanner beeps an error tone when [E / yes / gps] is
pressed.

*You can register current Location Information to a previously stored Location, too. For this operation,
long press [FUNC] + [E / yes / gps] key in Review Location Mode. (See Review Location Mode for details.)

F _

HOLD

_ _ _ _ _ _ _ _ _

G P S

System 1

_______

C

851. 0125MHz

_ _

N F M

S 0 : 1 - - - - - - - - -
G R P - 2 - - - - - - - -

F _

HOLD

_ _ _ _ _ _ _ _ _

G P S

System 1

_______

C

851. 0125MHz

_ _

N F M

Road 0. 500mi

Advertising