Uniden BCD396XT User Manual
Page 228
228
<COMMAND STS>
Get Current Status
Controller → Radio
STS[\r]
Radio → Controller
STS,[DSP_FORM],[L1_CHAR],[L1_MODE],[L2_CHAR],[L2_MODE],[L3_CHAR],[L3_MODE],
[L4_CHAR],[L4_MODE],････,[L8_CHAR],[L8_MODE],[SQL],[MUT],[BAT],[WAT],[RSV],
[RSV],[SIG_LVL],[BK_COLOR],[BK_DIMMER][\r]
[DSP_FORM] : Display Form
(4 - 8dight:########)
(each # is 0 or 1) 0 means Small Font / 1 means Large Font.
[L1_CHAR]
: Line1 Characters 16char (fixed length)
[L1_MODE]
: Line1 Display Mode 16char
[L2_CHAR]
: Line2 Characters 16char (fixed length)
[L2_MODE]
: Line2 Display Mode 16char
[L3_CHAR]
: Line3 Characters 16char (fixed length)
[L3_MODE]
: Line3 Display Mode 16char
[L4_CHAR]
: Line4 Characters 16char (fixed length)
[L4_MODE]
: Line4 Display Mode 16char
:
[L8_CHAR]
: Line8 Characters 16char (fixed length)
[L8_MODE]
: Line8 Display Mode 16char
[SQL]
: Squelch Status
(0:CLOSE / 1:OPEN)
[MUT]
: Mute Status
(0:OFF / 1:ON)
[RSV]
: Reserve Parameter
* This is always only “0”.
[BAT]
: Battery Low Status
(0:No Alert / 1:Alert)
[WAT]
: Weather Alert Status (0:No Alert / 1: Alert / $$$: Alert
SAME CODE)
[SIG_LVL]
: Signal Level
( 0 – 5 )
[BK_COLOR] : Backlight Color
(OFF,BLUE,RED,MAGENTA,GREEN,CYAN,YELLOW,WHITE)
[BK_DIMMER] : Backlight Dimmer (0:OFF / 1:Low / 2:Middle / 3:High )
NOTE : ) Display Mode for Line1 – Line8
(space) : NORMAL CHAR, *: REVERSE CHAR
_ (Under bar) : Underline
If all 16chars are normal, only "," is sent.
The number of [Lx_CHAR] and [Lx_MODE] depend on Display Form.
Ex.1)
┌---------------┐
│ -- M E N U -- |
Squelch Status
: OPEN
│
Program System
|
Mute Status
: OFF
│Program Location|
Battery Low Status : No Alert
│Srch/CloCall Opt|
Weather Alert Status : No Alert
└---------------┘
→ STS[\r]
← 1111,
-- M E N U -- ,
← [L1_CHAR]
________________, ← [L1_MODE]
Program System ,
← [L2_CHAR]
****************,
← [L2_MODE]
Program Location,
← [L3_CHAR]