Uniden BCD396XT User Manual

Page 238

Advertising
background image

238

<COMMAND SIN>
Get/Set System Info
Controller → Radio
SIN,[INDEX][\r]
SIN,[INDEX],[NAME],[QUICK_KEY],[HLD],[LOUT],[DLY],[RSV],[RSV],[RSV],[RSV],
[RSV],[START_KEY],[RSV],[RSV],[RSV],[RSV],[RSV],[RSV],[NUMBER_TAG],
[AGC_ANALOG],[AGC_DIGITAL],[P25WAITING][\r]
Radio → Controller
SIN,[SYS_TYPE],[NAME],[QUICK_KEY],[HLD],[LOUT],[DLY],[RSV],[RSV],[RSV],[RSV],
[RSV],[REV_INDEX],[FWD_INDEX],[CHN_GRP_HEAD],[CHN_GRP_TAIL],[SEQ_NO],
[START_KEY],[RSV],[RSV],[RSV],[RSV],[RSV], [NUMBER_TAG],[AGC_ANALOG],
[AGC_DIGITAL],[P25WAITING],[PROTECT],[RSV][\r]
SIN,OK[\r]

[INDEX]

: System Index

[SYS_TYPE]

: System Type

CNV

: CONVENTIONAL

MOT

: MOTOROLA TYPE

EDC

: EDACS Narrow / Wide

EDS

: EDACS SCAT

LTR

: LTR

P25S

: P25 STANDARD

P25F

: P25 One Frequency TRUNK

[NAME]

: Name

(max.16char)

[QUICK_KEY]

: Quick Key

(0-99/.(dot) means none)

[HLD]

: System Hold Time

(0-255)

[LOUT]

: Lockout

(0:Unlocked / 1:Lockout)

[DLY]

: Delay Time

(-10,-5,-2,0,1,2,5,10,30)

[REV_INDEX]

: Reverse System Index of the Scan Setting

[FWD_INDEX]

: Forward System Index of the Scan Setting

[CHN_GRP_HEAD]

: Channel Group Index Head of the conventional system
or Site Index Head of the Trunked System

[CHN_GRP_TAIL]

: Channel Group Index Tail of the conventional system
or Site Index Tail of the Trunked System

[SEQ_NO]

: System Sequence Number

(1 - 500)

[START_KEY]

: Startup Configuration Key

(0-9/.(dot) means none)

[NUMBER_TAG]

: Number tag

(0-999 / NONE)

[AGC_ANALOG]

: AGC Setting for Analog Audio

(0:OFF / 1:ON)

[AGC_DIGITAL]

: AGC Setting for Digital Audio

(0:OFF / 1:ON)

[P25WAITING]

: P25 Waiting time

(0,100,200, .... , 900,1000)

[PROTECT]

: Protect bit Status

(0:OFF / 1:ON)

[RSV]

: Reserve Parameter

* This is always only “,”.


Get/Set System Information.
The scanner returns only "," to punctuate for parameters which are not

appropriate the system type.

In set command, the scanner neglects the parameters that are not appropriate
the system type.
In set command, only "," parameters are not changed.
The set command is aborted if any format error is detected.
This command is only acceptable in Programming Mode.
When the system protect bit is ON, except [SYS_TYPE], [NAME], [REV_INDEX],
[FWD_INDEX], [CHN_GRP_HEAD], [CHN_GRP_TAIL], other parameters will be send as
a reserve parameter in the Radio -> Controller command.

Advertising