Uniden BCD396XT User Manual
Page 244
244
<COMMAND AGT>
Append TGID Group
Controller → Radio
AGT,[SYS_INDEX][\r]
Radio → Controller
AGT,[GRP_INDEX][\r]
[SYS_INDEX]
: System Index
[GRP_INDEX] : appended TGID Group Index
Append TGID Group to the system.
Returns "-1" if the scanner failed to create because of no resource.
This command is only acceptable in Programming Mode.
<COMMAND DGR>
Delete Group / Site
Controller → Radio
DGR,[INDEX][\r]
Radio → Controller
DGR,OK[\r]
[INDEX]
: Group / Site Index
This command deletes a Channel Group, TGID Group or Site.
This command is only acceptable in Programming Mode.
<COMMAND GIN>
Get/Set Group Info
Controller → Radio
GIN,[GRP_INDEX][\r]
GIN,[GRP_INDEX],[NAME],[QUICK_KEY],[LOUT],[LATITUDE],[LONGITUDE],[RANGE],
[GPS ENABLE][\r]
Radio → Controller
GIN,[GRP_TYPE],[NAME],[QUICK_KEY],[LOUT],[REV_INDEX],[FWD_INDEX],[SYS_INDEX],
[CHN_HEAD],[CHN_TAIL],[SEQ_NO] ,[LATITUDE],[LONGITUDE],[RANGE],[GPS ENABLE]
[\r]
GIN,OK[\r]
For Group Information
[GRP_INDEX]
: Group Index
[GRP_TYPE]
: Group Type
(C: Channel Group / T: TGID Group)
[NAME]
: Name
(max.16char)
[QUICK_KEY]
: Quick Key (1-9,0: means 10, .(dot): means none)
[LOUT]
: Lockout
(0:Unlocked / 1:Lockout)
[REV_INDEX]
: Reverse Group Index of the System
[FWD_INDEX]
: Forward Group Index of the System
[SYS_INDEX]
: System Index
[CHN_HEAD]
: Channel Index Head of the Group List
[CHN_TAIL]
: Channel Index Tail of the Group List
[SEQ_NO]
: Group Sequence Number of the System
[LATITUDE]
: North or South Latitude
[LONGITUDE]
: West or East Longitude
[RANGE]
: Range
(1-250 : 1= 0.5 mile or km)
[GPS ENABLE]
: GPS Location detection
(0:OFF/1:ON)