Set longitude, Set range – Uniden BCD396XT User Manual

Page 57

Advertising
background image

Friday, November 07, 2008

57

If “DEG:DDD.dddddd” is selected in Set Pos Format, the display is the following.

Set Longitude

Enter the longitude data using the number keys.

Press any number key when the cursor is in the last position to toggle between west longitude (W) and
east longitude (E).

Then press [E / yes / gps] to accept and return to the previous menu.

If “DMS:DDD⁰MM’SS.ss” is selected in Set Pos Format, the display is the following.

Set Longi tude

000⁰00’00. 00 W

If “DEG:DDD.dddddd” is selected in Set Pos Format, the display is the following.

Set Longi tude

000. 0000 W

Set Range

In this menu, the setting unit depends on the setting in Set Unit.

When you select “mile” in Set Unit, the displayed unit is mile.

When you select “km” in Set Unit, the displayed unit is km.

The valid setting range is from 0.5 to 125.0 in 0.5 steps.

Press [E / yes / gps] to accept the setting and return to the previous menu.

Set Lati tude

00. 000000 N

Advertising