Epson WorkForce 520 series - Manual (Page 39)

Sending a Fax From the Control Panel 39
Sending a Fax From the Control Panel
You can send a fax by manually entering a fax number, as described below.
Note:
To dial the number using a telephone, by redialing, or by selecting from your speed dial
list, see the next section. To send a fax from your computer using the Epson FAX Utility,
see your online User’s Guide.
1. Place your original(s) for faxing (see page 28).
2. Press the K Fax button.
3. Use the numeric keypad to manually enter the fax
number. You can enter up to 64 digits.
4. To change fax settings, press x Menu and select settings as necessary.
5. Press the x B&W or x Color button to send your fax.
Note:
If the recipient’s fax machine prints only in black and white, your fax is automatically
sent in black and white even if you select color.
■ If you are scanning with the Automatic Document Feeder, your
document is automatically scanned and faxed.
■ If you placed your document on the scanner
glass, you see this screen after the first page is
scanned:
If you need to fax additional pages, place your original on the scanner
glass or in the Automatic Document Feeder. Then press
1 to continue. If
you do not need to fax another page, press 2 . Your document is faxed.
■ If the fax number is busy, you see a redialing message and the product
redials after one minute. To redial immediately, press
Redial/Pause .
To cancel faxing, press y Stop/Clear Settings at any time.
Other Ways to Dial a Fax Number
Here are some other ways you can dial a fax number:
■ Redial/Pause : Redial the last fax number you used.
■ Speed Dial/Group Dial : Select or type the number of the speed dial/group
dial entry and press OK . Press 1 to enter another entry, or press 2 to continue.