Epson WorkForce 520 series - Manual (Page 58)

58 Notices
FCC Compliance Statement
For United States Users
This equipment complies with Part 68 of the FCC rules and the requirements adopted by
the ACTA. On the back side is a label that contains, among other information, the FCC
registration number and the ringer equivalence number (REN) for this equipment. You
must, upon request, provide this information to your local telephone company. The
information associated with the services the equipment is to be connected are REN: 0.0B,
Jack type: RJ-11C.
The REN is useful to determine the quantity of devices that you may connect to your
telephone line and still have all of those devices ring when your telephone number is
called. In most, but not all areas, the sum of the RENs of all devices connected to one line
should not exceed five (5.0). To be certain of the number of devices that you may connect
to your line, you may want to contact your local telephone company to determine the
maximum REN for your calling area. For products approved after July 23, 2001, the REN
for this product is part of the product identifier that has the format US:
BKMFA00BC365A. The digits represented by 00 are the REN without a decimal point
(e.g., 00 is a REN of 0.0). For earlier products, the REN is separately shown on the label.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs.
Should this equipment cause harm to the telephone network, the telephone company may
discontinue your service temporarily. If possible they will notify you in advance that
temporary discontinuance of service may be required. But if advanced notice isn’t
practical, the telephone company will notify you as soon as possible. You will be informed
of your right to file a complaint with the FCC. The telephone company may make
changes in its facilities, equipment, operations or procedures that could affect the proper
functioning of your equipment. If they do, you will be notified in advance to give you an
opportunity to maintain uninterrupted telephone service.
This product is not intended to be repaired. If you experience trouble with this
equipment, please contact:
Name: Epson America, Inc.
Address: 3840 Kilroy Airport Way, Long Beach, CA 90806 U.S.A.
Telephone: (562) 981-3840
The telephone company may ask that you disconnect this equipment from the network
until the problem has been corrected or until you are sure that the equipment is not
malfunctioning.