Cisco ASA 5505 - Manual (Page 1259)

59-13
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 59 Configuring the ASA CX Module
Monitoring the ASA CX Module
Examples
The following is sample output from the show module command for an ASA with an ASA CX SSP
installed:
hostname# show module
Mod Card Type Model Serial No.
--- -------------------------------------------- ------------------ -----------
0 ASA 5585-X Security Services Processor-10 wi ASA5585-SSP-10 JAF1507AMKE
1 ASA 5585-X CX Security Services Processor-10 ASA5585-SSP-CX10 JAF1510BLSA
Mod MAC Address Range Hw Version Fw Version Sw Version
--- --------------------------------- ------------ ------------ ---------------
0 5475.d05b.1100 to 5475.d05b.110b 1.0 2.0(7)0 100.7(6)78
1 5475.d05b.2450 to 5475.d05b.245b 1.0 2.0(13)0 0.6.1
Mod SSM Application Name Status SSM Application Version
--- ------------------------------ ---------------- --------------------------
1 ASA CX Security Module Up 0.6.1
Mod Status Data Plane Status Compatibility
--- ------------------ --------------------- -------------
0 Up Sys Not Applicable
1 Up Up
Showing Module Statistics
To show module statistics, enter the following command:
Examples
The following is sample output from the show service-policy command showing the ASA CX policy
and the current statistics as well as the module status when the authentication proxy is disabled:
hostname# show service-policy cxsc
Global policy:
Service-policy: global_policy
Class-map: bypass
CXSC: card status Up, mode fail-open, auth-proxy disabled
packet input 2626422041, packet output 2626877967, drop 0, reset-drop 0, proxied 0
The following is sample output from the show service-policy command showing the ASA CX policy
and the current statistics as well as the module status when the authentication proxy is enabled; in this
case, the proxied counters also increment:
hostname# show service-policy cxsc
Global policy:
Service-policy: pmap
Class-map: class-default
Default Queueing Set connection policy: random-sequence-number disable
drop 0
CXSC: card status Up, mode fail-open, auth-proxy enabled
packet input 7724, packet output 7701, drop 0, reset-drop 0, proxied 10
Command Purpose
show service-policy cxsc Displays the ASA CX statistics and status per service policy.