Cisco ASA 5505 - Manual (Page 1286)

60-18
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 60 Configuring the ASA CSC Module
Where to Go Next
Where to Go Next
For instructions about how to use the CSC SSM GUI, see the Cisco Content Security and Control (CSC)
SSM Administrator Guide.
Additional References
For additional information related to implementing the CSC SSM, see the following documents:
Feature History for the CSC SSM
Table 60-2 lists each feature change and the platform release in which it was implemented.
Related Topic Document Title
Assistance with SSM hardware installation and
connection to the ASA. hardware guide
Accessing ASDM for the first time and
assistance with the Startup Wizard. Cisco ASA 5500 Series Adaptive Security Appliance Getting Started Guide
Instructions on use of the CSC SSM GUI.
Additional licensing requirements of specific
windows available in the CSC SSM GUI.
Reviewing the default content security policies
in the CSC SSM GUI before modifying them or
entering advanced configuration settings. Cisco Content Security and Control (CSC) SSM Administrator Guide
Technical Documentation, Marketing, and
Support-related information. See the following URL:
http://www.cisco.com/en/US/products/ps6823/index.html .
Table 60-2 Feature History for the CSC SSM
Feature Name Platform Releases Feature Information
CSC SSM 7.0(1) The CSC SSM runs Content Security and Control software, which provides
protection against viruses, spyware, spam, and other unwanted traffic.
We introduced the following commands: csc {fail-close | fail-open}, hw-module
module 1 [recover | reload | reset | shutdown], session, show module [all | slot
[details | recover]].
Password reset 7.2(2) We introduced the following command: hw-module module password-reset.
CSC SSM 8.1(1) and 8.1(2) This feature is not supported on the ASA 5580.
CSC syslog format 8.3(1) CSC syslog format is consistent with the ASA syslog format. Syslog message
explanations have been added to the Cisco Content Security and Control (CSC)
SSM Administrator Guide. All syslog messages include predefined syslog
priorities and cannot be configured through the CSC SSM GUI.