C h a p t e r – Cisco ASA 5505 User Manual
Page 1427
C H A P T E R
67-1
Cisco ASA 5500 Series Configuration Guide using the CLI
67
Configuring Connection Profiles, Group Policies,
and Users
This chapter describes how to configure VPN connection profiles (formerly called “tunnel groups”),
group policies, and users. This chapter includes the following sections.
•
Overview of Connection Profiles, Group Policies, and Users, page 67-1
•
Configuring Connection Profiles, page 67-6
•
•
Configuring User Attributes, page 67-79
In summary, you first configure connection profiles to set the values for the connection. Then you
configure group policies. These set values for users in the aggregate. Then you configure users, which
can inherit values from groups and configure certain values on an individual user basis. This chapter
describes how and why to configure these entities.
Overview of Connection Profiles, Group Policies, and Users
Groups and users are core concepts in managing the security of virtual private networks (VPNs) and in
configuring the ASA. They specify attributes that determine user access to and use of the VPN. A group
is a collection of users treated as a single entity. Users get their attributes from group policies. A
connection profile identifies the group policy for a specific connection. If you do not assign a particular
group policy to a user, the default group policy for the connection applies.
Note
You configure connection profiles using tunnel-group commands. In this chapter, the terms “connection
profile” and “tunnel group” are often used interchangeably.
Connection profiles and group policies simplify system management. To streamline the configuration
task, the ASA provides a default LAN-to-LAN connection profile, a default remote access connection
profile, a default connection profile for SSL/IKEv2 VPN, and a default group policy (DfltGrpPolicy).
The default connection profiles and group policy provide settings that are likely to be common for many
users. As you add users, you can specify that they “inherit” parameters from a group policy. Thus you
can quickly configure VPN access for large numbers of users.
If you decide to grant identical rights to all VPN users, then you do not need to configure specific
connection profiles or group policies, but VPNs seldom work that way. For example, you might allow a
finance group to access one part of a private network, a customer support group to access another part,