Radius accounting disconnect reason codes – Cisco ASA 5505 User Manual
Page 1935
C-37
Cisco ASA 5500 Series Configuration Guide using the CLI
Appendix C Configuring an External Server for Authorization and Authentication
Configuring an External RADIUS Server
RADIUS Accounting Disconnect Reason Codes
These codes are returned if the ASA encounters a disconnect when sending packets:
IETF-Radius-Service-Type
Y
Y
Y
6
Integer
Single
Seconds. Possible Service Type
values:
.Administrative—User is allowed
access to configure prompt.
.NAS-Prompt—User is allowed
access to exec prompt.
.remote-access—User is allowed
network access
IETF-Radius-Session-Timeout
Y
Y
Y
27
Integer
Single
Seconds
Table C-8
ASA Supported IETF RADIUS Attributes and Values
Disconnect Reason Code
ACCT_DISC_USER_REQ = 1
ACCT_DISC_LOST_CARRIER = 2
ACCT_DISC_LOST_SERVICE = 3
ACCT_DISC_IDLE_TIMEOUT = 4
ACCT_DISC_SESS_TIMEOUT = 5
ACCT_DISC_ADMIN_RESET = 6
ACCT_DISC_ADMIN_REBOOT = 7
ACCT_DISC_PORT_ERROR = 8
ACCT_DISC_NAS_ERROR = 9
ACCT_DISC_NAS_REQUEST = 10
ACCT_DISC_NAS_REBOOT = 11
ACCT_DISC_PORT_UNNEEDED = 12
ACCT_DISC_PORT_PREEMPTED = 13
ACCT_DISC_PORT_SUSPENDED = 14
ACCT_DISC_SERV_UNAVAIL = 15
ACCT_DISC_CALLBACK = 16
ACCT_DISC_USER_ERROR = 17
ACCT_DISC_HOST_REQUEST = 18
ACCT_DISC_ADMIN_SHUTDOWN = 19
ACCT_DISC_SA_EXPIRED = 21
ACCT_DISC_MAX_REASONS = 22