Viewing resource allocation – Cisco ASA 5505 User Manual

Page 229

Advertising
background image

5-29

Cisco ASA 5500 Series Configuration Guide using the CLI

Chapter 5 Configuring Multiple Context Mode

Monitoring Security Contexts

GigabitEthernet0/1.20, GigabitEthernet0/2, GigabitEthernet0/2.30,

GigabitEthernet0/3, Management0/0, Management0/0.1

Flags: 0x00000019, ID: 257

Context "null", is a system resource

Config URL: ... null ...

Real Interfaces:

Mapped Interfaces:

Flags: 0x00000009, ID: 258

See the command reference for more information about the detail output.

The following is sample output from the show context count command:

hostname# show context count

Total active contexts: 2

Viewing Resource Allocation

From the system execution space, you can view the allocation for each resource across all classes and
class members.

To view the resource allocation, enter the following command:

The following sample output shows the total allocation of each resource as an absolute value and as a
percentage of the available system resources:

hostname# show resource allocation

Resource Total % of Avail

Conns [rate] 35000 N/A

Inspects [rate] 35000 N/A

Syslogs [rate] 10500 N/A

Conns 305000 30.50%

Hosts 78842 N/A

SSH 35 35.00%

Telnet 35 35.00%

Xlates 91749 N/A

All unlimited

Command

Purpose

show resource allocation

[detail]

Shows the resource allocation. This command shows the resource
allocation, but does not show the actual resources being used. See the

“Viewing Resource Usage” section on page 5-32

for more information

about actual resource usage.

The detail argument shows additional information. See the following
sample outputs for more information.

Advertising