Cisco ASA 5505 - Manual (Page 389)

15-3
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 15 Adding an Extended Access List
Configuring Extended Access Lists
Adding an Extended Access List
An access list is made up of one or more access control entries (ACEs) with the same access list ID. To
create an access list you start by creating an ACE and applying a list name. An access list with one entry
is still considered a list, although you can add multiple entries to the list.
Prerequisites
(Optional) Create an object or onject group according to the “Configuring Objects and Groups” section
on page 13-1 .
Guidelines
To delete an ACE, enter the no access-list command with the entire command syntax string as it appears
in the configuration. To remove the entire access list, use the clear configure access-list command.