Feature history for standard access lists – Cisco ASA 5505 User Manual

Page 405

Advertising
background image

17-5

Cisco ASA 5500 Series Configuration Guide using the CLI

Chapter 17 Adding a Standard Access List

Feature History for Standard Access Lists

The following example shows how to permit IP traffic through the ASA if conditions are matched:

hostname(config)# access-list 77 standard permit

The following example shows how to specify a destination address:

hostname(config)# access-list 77 standard permit host 10.1.10.123

Feature History for Standard Access Lists

Table 17-2

lists each feature change and the platform release in which it was implemented.

Table 17-2

Feature History for Standard Access Lists

Feature Name

Releases

Feature Information

Standard access lists

7.0(1)

Standard access listsidentify the destination IP addresses of
OSPF routes, which can be used in a route map for OSPF
redistribution.

We introduced the feature and the following command:
access-list standard.

Advertising