Configuring identity options – Cisco ASA 5505 User Manual

Page 726

Advertising
background image

36-14

Cisco ASA 5500 Series Configuration Guide using the CLI

Chapter 36 Configuring the Identity Firewall

Task Flow for Configuring the Identity Firewall

Configuring Identity Options

Perform this procedure to add or edit the Identity Firewall feature; select the Enable check box to enable
the feature. By default, the Identity Firewall feature is disabled.

Prerequisites

Before configuring the identify options for the Identity Firewall, you must you must meet the
prerequisites for the AD Agent and Microsoft Active Directory. See

Prerequisites, page 9

the

requirements for the AD Agent and Microsoft Active Directory installation.

To configure the Identity Options for the Identity Firewall, perform the following steps:

Advertising