Abbott Freestyle Freedom Lite - Manual (Page 34)

30
Maintaining the Meter
Replacing the Battery
The meter comes with a #2032, 3-volt, lithium battery installed . It provides power
for about 1000 tests .
•
When appears on the display, the battery is low .
•
When appears, the meter may fail to turn on .
•
When you are ready to install a new battery, remove the old battery and
install the new battery within 60 seconds to avoid losing time and date
settings .
•
If time and date settings are lost, both time and date will
flash until reset . Reset time and date to get the correct 7-, 14-, and 30-day
averages . If the time and date settings are lost, you may still perform an
accurate blood glucose test .
•
Memory log and previously stored user settings, such as date and time
format, are not affected by removing the battery .
IMPORTANT: When appears, replace the battery immediately .
English