Ryobi SSP300 - Manual

HOW TO GET STARTED
WARNING: This How To Get Started sheet is
not a substitute for reading the operator’s manual.
To reduce the risk of injury or property damage, user
must read and understand operator’s manual before
using this product.
Lubricate the piston.
Reassemble the unit.
Fill 1.5 qt. container with paint or stain.
Plug in the sprayer.
Spray on scrap material to prime.
Paint as desired, keeping the tip of the sprayer
8 to 10 inches away from the surface.
Unplug the sprayer.
Return unused paint or stain to original container.
Clean sprayer.
1
2
3
4
5
6
For detailed instructions on how to perform any of
the steps below, please see the operator’s manual.
990000569
3-21-13 (REV:01)
7
8
3
5
6
2
7
4
8
1