Altera Nios II User Manual
Nios ii flash programmer user guide
Advertising
Table of contents
Document Outline
- Nios II Flash Programmer User Guide
- Contents
- 1. Overview of the Nios II Flash Programmer
- 2. Using the Flash Programmer GUI
- 3. Using the Flash Programmer from the Command Line
- A. Non-Standard Flash Memories
- B. Supported Flash Memory Devices
- C. Stand-Alone Mode
- D. Troubleshooting
- Overview
- Start Button Grayed Out in the Flash Programmer GUI
- "No Nios II processors available" Error
- "No CFI table found" Error
- "No EPCS registers found" Error
- "System does not have any flash memory" Error
- "Reading System ID at address 0x<address>: FAIL" Error
- "Base address not aligned on size of device" Error
- Additional Information