Headlamp high/low-beam changer, Flash-to-pass, Windshield wipers – Saturn 2010 AURA Hybrid User Manual

Page 151

Advertising
background image

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to high
beam, push the turn signal/multifunction lever away
from you.

This instrument panel cluster light

3

comes on if the

high beam lamps are turned on while the ignition is
in ON/RUN.

To change the headlamps from high beam to low beam,
pull the turn signal lever toward you.

Flash-to-Pass

This feature lets the high-beam headlamps be used to
signal a driver in front of you that you want to pass.

Pull the turn signal/multifunction lever toward you until
the high-beam headlamps come on, then release
the lever to turn them off.

Windshield Wipers

The windshield wiper lever is on the right side of the
steering column.

Move the lever to control the windshield wipers.

9

(Off): Turns the windshield wipers off.

&

(Intermittent; Speed Sensitive Wipers): For

intermittent or speed sensitive operation. The amount of
delay time varies between wiping cycles due to the
delay setting selected or the speed of the vehicle. As
vehicle speed is increased or decreased, the wiper
interval also increases or decreases.

4-5

Advertising