CIRCUTOR computer PLUS-TF Series - Manual (Page 31)

31
Fig. 21.- Main menu Fig.22.- Setup menu
 Select the option and press
OK
. The screen shown on Fig. 23 will be displayed.
 Press
Edit
and the password screen will be displayed if the edition is locked. Follow the steps
described in section 7.1. After entering the password the screen shown on Fig.24 will be displayed.
Fig.23.- Programming capacitor power Fig.24.- Programming capacitor power
 On the screen shown on Fig.24, each box represents a capacitor step and the number inside it states
the nominal kvar of the capacitor. Use the arrow to change the step being adjusted. To adjust the
first one, press
Edit when it is highlighted in reverse video and the screen shown on Fig. 25 will be
displayed, where you can change the kvar of the highlighted step.