CIRCUTOR DISPENSER Series - Manual (Page 14)

3�3�2�- BONUS MODE
When the micro-grid is operating during an excess power period, the Dispenser allows the
user to consume more power than that established by the user's contracted energy.
To do so, the Excess factor parameter has been defined in the DISPENSER-SOFT application
as a multiplier factor that increases the value of the maximum power available for consumption.
Figure 8: Controlling the maximum power, Bonus mode�
Table 3: Range of values of the excess factor�
Power factor Range of values
Excess factor 1...3
3�3�3�- RESTRICTION MODE
If, on the other hand, the micro-grid is in the power limiting mode, the Dispenser will reduce
the maximum power available for consumption, also reducing the power that the user can con-
sume.
The Limiting factor parameter has been defined in the DISPENSER-SOFT application as a
multiplier factor that reduces the value of the maximum power available for consumption.
Figure 9: Controlling the maximum power, Restriction mode�
Table 4: Range of values of the limiting factor�
Power factor Range of values
Limiting factor 0...1
14
Dispenser Universal System
Instruction Manual