CIRCUTOR DISPENSER Series - Manual (Page 97)

Table 36 (Cont�) : Operation indicator menu screens�
Screens
L1
0.96.5.1
0
Position of the general relay, indicates whether the general relay is connected or
disconnected.
Range of values: 0, relay disconnected.
1, relay connected.
L1
0
0.96.5.2
Adjusted power limit exceeded, indicates whether the adjusted power limit has
been exceeded or not.
Range of values: 0, the limit has not been exceeded.
1, the limit has been exceeded.
L1
0
0.96.5.3
Minimum or reduced power operation indicator, indicates whether the unit has
reduced the power limit as a result of a demand management order. Range of val-
ues: 0, the power limit has not been reduced.
1, the power limit has been reduced.
L1
0
0.96.5.4
Communications indicator, indicates whether the unit has been registered in the
communications network or not.
Range of values: 0, not registered.
1, registered.
L1
13.10
0.0.9.1
Local time of the meter, indicates the meter time, according to the time of its inter-
nal clock. L1
L1
27.02.15
0.0.9.2
Local date of the meter, indicates the meter date, according to the date of its inter-
nal clock.
Short press the button to browse the different screens.
Long press the button to exit the operation indicators menu.
The unit returns to the general display screens if no button is pressed for 60 seconds .
97 Instruction Manual
Dispenser Universal System