Neotech Communications GEC-48CHP-R - Manual

GEC-48CHP-R / GEC-416CHP-R
Receiver of 8/16-port Ethernet Extender over Coax with PoC + 4-port 10/100/1000TX Ethernet Switch
1 V1.0
This quick start guide describes how to install and use the receiver of 8/16-port Ethernet Extender over Coax with Power over Coax (PoC) +
4-port 10/100/1000Base-T Ethernet switch.
Overview
The GEC-48CHP-R/GEC-416CHP-R receiver works with the transmitter of 1 port Ethernet Extender over
Coax with PoC (FEC-11CHP) to provide Ethernet Extension of 8/16 channel 10/100Base-TX over Coaxial
cable to 4-port 10/100/1000Mbps Ethernet. The maximum transmission distance is 800m. The product
support PoC, hence, no power point is required at the camera side for the transmitter (FEC-11CHP) and
its connected IP camera if the camera obtain power from the transmitter via Power over Ethernet (PoE).
The Ethernet data received by anyone of the coax data port (1-8/16) at the receiver is transferred to all
four Ethernet ports (P1-P4). The product is good for retrofit of analogue system by using the existing
coaxial cable infrastructure.
General
To ensure trouble free transportation and storage, all Neotech products must be thoroughly inspected,
tested and properly packed before delivery. Check the product upon receipt for any visible damage which
may have been caused during shipment.
Package Content
 Receiver of 8-port Ethernet Extender over Coax with PoC + 4-port 10/100/1000Base-T Ethernet
Switch x 1(GEC-48CHP-R) or,
Receiver of 16-port Ethernet Extender over Coax with PoC + 4-port 10/100/1000Base-T Ethernet
Switch x 1(GEC-416CHP-R)
 AC Power Cord x 1
 Quick Start Guide x 1
Physical Description
Front Panel
GEC-48CHP-R
GEC-416CHP-R