Oxmoor SPOT-1 User Manual

Spot-1, Infrared emitter panels

Advertising
background image

Oxmoor Corporation, LLC, 309 Cahaba Valley Parkway, Birmingham, AL 35124 USA Toll Free: 1-800-262-6898

Phone: 205-982-8200 Fax: 205-982-8250 E-mail: [email protected] Internet: www.oxmoor.com

SPOT-1

INFRARED EMITTER PANELS

Oxmoor Corporation, LLC's
SPOT-1 Infrared Emitter Panels
simplify the design require-
ments for Infrared transmission
in small facilities. This Infrared
Emitter Panel is ideal for appli-
cations where discreet, unobtru-
sive IR systems are required.

The 72-diode array is designed
to cover small “spot” areas of
approximately 314 to 2,800
square feet. It is ideal for use in
hotels, courtrooms, classrooms,
museums, and other facilities of
this type.

SPOT-1 is housed in a recessed
6-inch lighting enclosure with a
white trim ring and glass lens.
This enclosure is equivalent to
the HALO H7TCP housing and
70P trim ring and lens, and pro-
vides for easy installation in most
types of overhead ceiling.

SPOT-1 has an IR transmission
bandwidth from 95 kHz through
3 mHz. It requires a single AC
power connection between 100
VAC and 230 VAC, and a modu-
lated RF connection made
through a BNC style connector.
With an input impedance of 25 k
ohms at 95 kHz, multiple units
can be parallel and driven from
a single modular channel.

SPOT-1 provides an automatic
on and off feature. When using
either a 95 kHz or 250 kHz car-
rier frequency, the standard fre-
quencies used for hearing im-
paired applications, an internal
jumper can be set to detect the

carrier. The unit turns itself off
when the carrier is not present.
This feature greatly extends the
life of the emitter panels.

SPOT-1 can be used with any
standard IR Receiver that oper-
ates between 95 kHz and 250
kHz.

The Emitter Panel is ideal in ap-
plications where adjacent rooms
open into one large room, as in a
room combining application.
The panels can be synchronized
by using the Oxmoor PIR-88M

Eight-Channel Programmable
Infrared Modulator.

For more information on any
Oxmoor product, please contact
the Oxmoor Sales Department.
Or download complete product
brochures and manuals at our
website: www.oxmoor.com.

Oxmoor's SPOT-1 is mounted in a standard recessed lighting enclosure.

Advertising