WaveWare WiPath PDR-3000 User Manual

User instructions for pdtp

Advertising
background image

User Instructions For PDTP

Programming software for

Paging Data Terminals (PDTs)

Paging Data Receivers (PDRs)

Paging Serial Receivers (PSRs)

Installing the software

PDTP requires a PC running Windows 2000/NT/XP and at least 32MB RAM.

1. Unzip the installer PDTP.zip to a temporary file or open the installer files in

Winzip.

2. Run the installer by double clicking on Setup.exe.
3. Follow the instructions in the installer wizard.
4. Once installed run PDTP by clicking on the shortcut or selecting esp.exe from

the folder in which it is installed.

5. You will be prompted to Enter Set ID . The key will have been provided to

you or may be contained on the CD in a notepad file called PDTP Key.txt.

6. Hit OK.
7. If your key permits access to more than one Template then a selection of

templates will appear in a new window. If your key only allows access to one
template then PDTP will start automatically in that template.


{Note: templates determine the function of the PDT/PDR e.g. Flex or pocsag, PDT or
PDR etc.}

Connecting the PDT/PDR

Required Items
:

*1 x Serial Null Modem DB9 female-to-female cable.

*1 x 12v DC Power supply rated at 0.5 amps (or greater) with
2.5mm center positive plug attached.


1. Plug the serial cable into the PC (COM1 is the default port)
2. Open PDTP
3. Select the template appropriate to the PDT/PDR/PSR that you are

programming. Note if you only have a key for one template then PDTP will
open automatically with that template active.

Advertising
This manual is related to the following products: