American Time Wi-Fi Analog Clock - Manual

Wi-Fi Analog Clocks Quick Start Installation Guide
2
1
Pre-Installation
1. Verify Dynamic Host Configuration Protocol (DHCP) settings.
2. Verify firewall port 123 is open for UDP data transfer.
•Contact your IT staff to verify these settings
3. Plan Analog Wi-FI Clock locations.
4. Verify the intended clock locations have good Wi-Fi coverage.
•Contact your IT staff for signal levels in your facility
Unpack the box
• Remove the components from the box. Save the packing materials in case you need
them later.
Check the contents
Your package contains:
• Analog Wi-Fi clock(s)
• Quick Start Guide
• Installation & Operation Manual
3
Please read this first!
If this is your first installation or you have questions at any time during this process, please call American
Time toll free at
800-328-8996 .
phone:
800-328-8996
fax:
800-789-1882
online:
american-time.com
mail:
140 3rd St. So.; PO Box 707, Dassel, MN 55325-0707