DAVIS DriveRight 600E VSS Installation Guide (8126VSS) - Manual (Page 3)

1
Introduction
This manual provides instructions and information necessary to install
the VSS version of the DriveRight 600
E
device.
Since the specific installation details vary from vehicle to vehicle, these
instructions are intended to be a general guide for professional installers
or for knowledgeable and experienced mechanics.
We strongly recommend that you read the entire manual before begin-
ning the installation. Be sure you understand each procedure thoroughly
before starting that procedure.
Components
Your DriveRight VSS installation kit should come with all of the
components show below. Make sure you have all listed items before
proceeding.
Note: DriveRight hardware components include extra pieces not required for installation.
Console & Mounting Brackets
Hardware
Mounting Bracket
Battery (CR123 3V Lithium) Visor Clip
Right Angle Adapter Bracket
Velcro® Tape (4 pair) Double-Sided Foam Tape (4 strips)
DriveRight Console
Tie Wraps (12)
6-32 Nuts (3)
#6 Flat Washers (6)
#6 Split Lock Washers (6)
#6 x 1/2" Pan Head
Self-Tapping Screws (3)
#6 x 1/2" Flat Head
Self-Tapping Screws (3)
6-32 x 1/2" Flat Head
Machine Screws (3)