Appliqué, Appliqué sharp curves – Baby Lock Crescendo (BLCR) Instruction and Reference Guide User Manual

Page 122

Advertising
background image

SEWING THE STITCHES

S-48

<Normal fabric>

a Wrong side of fabric

b Right side of fabric

l

Sew with the fold of the hem against the

presser foot guide.

m

Remove the basting stitching and reverse
the fabric.

a Wrong side of fabric
b Right side of fabric

Appliqué

a

Use a temporary spray adhesive, fabric glue
or a basting stitch to attach the appliqué to
the fabric.

*

This will keep the fabric from moving during
sewing.

a Appliqué
b Fabric glue

b

Select

or .

*

Adjust the stitch length and width to correspond to
the appliqué shape, size, and quality of material (see
page S-10).

c

Attach presser foot “J”. Check that the
needle drops slightly off the edge of the
appliqué, then start sewing.

a Appliqué material

a Needle drop position

Appliqué Sharp Curves

Stop the machine with the needle in the fabric
outside the appliqué. Raise the presser foot and turn
the fabric a little bit at a time while sewing for an
attractive finish to the seam.

Memo

• For details on each stitch, refer to the

“STITCH SETTING CHART” on page S-68.

1

2

Advertising
This manual is related to the following products: