Adjusting the character spacing, S-80, Example – Baby Lock Crescendo (BLCR) Instruction and Reference Guide User Manual

Page 154

Advertising
background image

SELECTING STITCH PATTERNS

S-80

Adjusting the Character Spacing

The space between the characters can be adjusted.

a

Press .

*

Press

to display

on the screen.

→ The character spacing window appears.

b

Press

or

to adjust character spacing.

*

Press

to increase the character spacing and

press

to decrease the character spacing.

Example:

*

Each setting equals a specific distance between
characters.

Value

mm

0

0

1

0.18

2

0.36

3

0.54

4

0.72

5

0.9

6

1.08

7

1.26

8

1.44

9

1.62

10

1.8

Memo

• The default setting is “0”. No number less

than “0” can be set.

• Changing character spacing by this

method, pertains to all characters. Spacing
changes are valid not only while entering
characters but also before and after the
entering of characters.

Advertising
This manual is related to the following products: