Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 159)

EDITING STITCH PATTERNS
Cha
ra
cte
r/D
ec
or
ati
ve
S
titc
he
s
Sewing S-85
S
3
No. Display Key Name Explanation Page
a Pattern display size Show the approximate size of the pattern selected.
: Nearly the same size as the sewn pattern
: 1/2 the size of the sewn pattern
: 1/4 the size of the sewn pattern
* The actual size of the sewn pattern may differ depending on the type of
fabric and thread that is used.
S-21
b Pivot key Press this key to select the pivot setting. When the pivot setting is
selected, stopping the machine lowers the needle and slightly raises the
presser foot automatically. In addition, when sewing is restarted, the
presser foot is automatically lowered.
• If this key appears as , the pivot function cannot be used.
• Be sure the “Needle Position - UP/DOWN” of Machine Settings is set to
the down position.
S-15
c Free motion mode
key Press this key to enter free motion sewing mode.
The feed dog is lowered and presser foot is raised to a height appropriate
for free motion quilting. S-40
d Automatic
reinforcement stitch
key Press this key to turn on the automatic reinforcement stitching mode. S-5
e Automatic thread
cutting key Press this key to turn on the automatic thread cutting mode. S-13
f Horizontal mirror
image key After selecting the stitch pattern, use this key to create a horizontal mirror
image of the stitch pattern. S-87
g Stitch width and
stitch length key Shows the stitch width and stitch length of the selected stitch pattern. The
machine default settings are highlighted. S-10 to
S-12
h Thread tension key Shows the thread tension setting for the selected stitch pattern. The
machine default settings are highlighted S-12
i Memory key Use this key to save stitch pattern combinations. S-96 to S-97
j Elongation key When 7mm satin stitch patterns are selected, press this key to choose
from 5 automatic length settings, without changing the stitch zigzag width
or stitch length settings. S-87
k Needle mode
selection key
(Single/Double) Press this key to choose single needle sewing or twin needle sewing. “Basic
operations”
l Sensor function key Press this key to use the sensor function.
m Size selection key Use this key to select the size of the stitch pattern (large, small). S-86
n Image key Press this key to display an enlarged image of the selected stitch pattern. S-89
o Vertical mirror image
key After selecting the stitch pattern, use this key to create a vertical mirror
image of the stitch pattern. S-87
p Thread density key After selecting the stitch pattern, use this key to change the thread density
of the pattern. S-88
q Delete key When you make a mistake selecting a stitch pattern, use this key to delete
the mistake. When you make a mistake in combining stitch patterns, use
this key to delete stitch patterns. S-78,
S-79
r Single/Repeat sewing
key Press this key to choose single stitches or continuous stitches. S-87
s Back to beginning key When sewing is stopped, press this key to return to the beginning of the
pattern.
S-88
t Home page screen
key (For embroidery and sewing machine only)
Press this key to return to the home page screen. –
u Screen lock key Press this key to lock the screen. When the screen is locked, the various
settings, such as the stitch width and stitch length, are locked and cannot
be changed. Press this key again to unlock the settings. S-18