Caution, Returning to the beginning of the pattern – Baby Lock Crescendo (BLCR) Instruction and Reference Guide User Manual

Page 162

Advertising
background image

EDITING STITCH PATTERNS

S-88

Changing Thread Density
(for Satin Stitch Patterns Only)

After selecting a satin stitch pattern, press

to

select your preferred thread density.

Returning to the Beginning of the
Pattern

When sewing character/decorative stitches, you
can return to the beginning of the pattern after trial
sewing or when the stitching is sewn incorrectly.

a

Press the “Start/Stop” button to stop the

machine, and then press

.

→ Sewing returns to the beginning of the selected

pattern (“W”) from the point where sewing was
stopped.

b

Press the “Start/Stop” button to continue
sewing.

CAUTION

• If the stitches bunch when thread density is

changed to

, return the thread density to

. If you continue sewing when the stitches

are bunched, the needle may bend or break.

Memo

• Even if you select a new pattern after

changing the thread density, the thread
density remains the same until you change
it.

• You cannot change thread density for a

combined pattern after additional patterns
are added.

Memo

• If this key is pressed when sewing is

stopped, patterns can be added at the end
of a combined stitch pattern. (In this
example, “!” is added.)

Advertising
This manual is related to the following products: