Specifications, Appendix a-19 – Baby Lock Crescendo (BLCR) Instruction and Reference Guide User Manual

Page 209

Advertising
background image

SPECIFICATIONS

Main

te

nan

ce

a

nd
Tr

oubl

es

hoo

ting

Appendix A-19

A

1

*

Please be aware that some specifications may change without notice.

This key does not operate when the needle is down. Raise the
needle and press the key again.

This message is displayed when a key on the LCD display is
touched while the needle is in the down position.

This pattern cannot be sewn with this mode.

This message is displayed when the selected stitch is not
available for the specific function.

This stitch is not “Dual Feed Mode” compatible.

This message appears when the dual feed foot cannot be used
with the current stitch. Select other stitch. (see page B-55)

This USB media cannot be used.

This message is displayed when you try to use incompatible
media.

This USB media is incompatible.

This message is displayed when you try to use incompatible
USB media. For a list of compatible USB media, visit
“ www.babylock.com ”.

Transmitting by USB

This message is displayed while the USB media is
transmitting.

Turn off the power and replace the needle plate.

This message is displayed when you try to sew with a stitch
other than a middle needle position stitch while the single-hole
needle plate is installed.

USB media error

This message is displayed when an error occurs with the USB
media.

USB media is not loaded. Load USB media.

This message is displayed when you try to recall or save a
pattern while no USB media is loaded.

Use the presser foot lifter button to lower the presser foot.

This message is displayed when a button, such as the
“Start/Stop” button, is pushed while the presser foot is raised.

When the speed controller is set to control the zigzag stitch
width, the "Start/Stop" button does not operate.

This message is displayed when the speed control lever is set
to control the zigzag stitch width, and the “Start/Stop” button
is pushed. Use the foot controller to operate the machine.

SPECIFICATIONS

Item

Specification

Sewing Machine and Accessories
(Box 1 of 2)

Dimensions of machine

Approx. 57.1 cm (W) × 33.5 cm (H) × 28.4 cm (D) (approx.
22-1/2 inches (W) × 13-1/16 inches (H) × 11-3/16 inches (D))

Dimensions of box

Approx. 68.5 cm (W) × 55.0 cm (H) × 37.7 cm (D) (approx.
26-15/16 inches (W) × 21-5/8 inches (H) × 14-13/16 inches
(D))

Weight of machine

Approx. 15.4 kg (approx. 33.9 lb)

Weight of box (for shipping)

Approx. 22.0 kg (approx. 48.5 lb)

Sewing speed

70 to 1050 stitches per minute

Needles

Home sewing machine needles (HA

× 130)

Extension table box
(Box 2 of 2)

Dimensions of extension table

Approx. 63.6 cm (W) × 9.8 cm (H) × 40.6 cm (D) (approx.
25-1/16 inches (W) × 3-7/8 inches (H) × 16 inches (D))

Dimensions of machine with extension
table attached

Approx. 81.1 cm (W) × 33.5 cm (H) × 40.6 cm (D) (approx.
32-1/16 inches (W) × 13-1/16 inches (H) × 16 inches (D))

Dimensions of box

Approx. 66.3 cm (W) × 42.7 cm (H) × 5.8 cm (D) (approx.
25-1/16 inches (W) × 16-13/16 inches (H) × 2-5/16 inches (D))

Weight of extension table

Approx. 2.2 kg (approx. 4.9 lb)

Weight of box (for shipping)

Approx. 3.0 kg (approx. 6.7 lb)

Total Shipping Weight (Combination of 2 boxes complete)

Approx. 27 kg (approx. 59.6 lb)

Marks

Error Messages

Cause/Solution

Advertising
This manual is related to the following products: