Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 25)

LCD SCREEN
G
ettin
g R
ea
d
y
Basic operations B-23
B
1
* All key functions of the LCD are explained in the “Key Functions” table on the following page.
■ Key Functions
h Scroll key
Press or , to move one page at a time, or touch anywhere on
the bar to jump ahead for additional pages of stitches.
–
No. Display Key Name Explanation Page
a “Utility Stitch” key Press this key to select a straight stitch, zigzag stitch, buttonhole, blind hem
stitch, or other stitches commonly used in garment construction. S-21
b “Character/
Decorative Stitch” key Press this key to select character or decorative stitch patterns. S-77
c Screen lock key Press this key to lock the screen. When the screen is locked, the various
settings, such as the stitch width and stitch length, are locked and cannot be
changed. Press this key again to unlock the settings. S-18
d Needle mode
selection key
(Single/Double) Press this key to select twin needle sewing mode. The sewing mode changes
between single needle mode and twin needle mode each time you press the
key. If the key display is light gray, the selected stitch pattern cannot be sewn
in the twin needle mode. B-46
e Sensor function key Press this key to use the sensor function. B-66
f Image key Press this key to display an enlarged image of the selected stitch pattern. S-22
g Machine’s memory
key Press this key to select from 3 memory functions; retrieving, storing or reset. S-22,
S-96,
S-98
h “L/R SHIFT” key Shows the tendency of Left/Right of the center line of the original zigzag stitch
currently selected stitch pattern. S-11
i Thread tension key Shows the automatic thread tension setting of the currently selected stitch
pattern. You can use the plus and minus keys to change the thread tension
settings. S-12
No. Display Key Name Explanation Page
a b c
g
i
j
e
k l m
r
o
n
p
q
d
f
h
t
s