Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 50)

UPPER THREADING
B-48
l
Start sewing.
Sample of Twin Needle Sewing
Using Threads that Unwind
Quickly
■ Using the Spool Net
If using transparent nylon monofilament thread,
metallic thread, or other strong thread, place the
included spool net over the spool before using it.
When using specialty threads, threading must be
done manually.
If the spool net is too long, fold it once to match it to
the spool size before placing it over the spool.
■ Using the Vertical Spool Pin
Use the vertical spool pin when using an irregularly
shaped thread spool, and when sewing with metallic
thread.
a
Insert the vertical spool pin onto the bobbin
winder shaft.
b
Install the spool felt and the thread spool in
that order, and then thread the upper
thread.
Memo
• To change direction when sewing with the
twin needle, raise the needle from the
fabric, raise the presser foot lever, and then
turn the fabric.
a Spool net
b Thread spool
c Spool pin
d Spool cap
Memo
• When threading the spool with the spool net
on, make sure that 5 cm - 6 cm (approx.
2 inches - 2-1/2 inches) of thread are pulled
out.
• It may be necessary to adjust the thread
tension when using the spool net.
a Bobbin winder shaft
b Vertical spool pin
c Spool felt
d Thread spool
Memo
• When setting the thread spool, set it so that
the thread winds off from the front of the
spool.
• If using metallic thread, we recommend that
you use a 90/14 home sewing machine
needle.
• Using the vertical spool pin with certain
types of threads will keep the thread from
twisting as it comes off the spool pin.
d
c
b
a