Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 58)

USING FUNCTIONS BY CONNECTING THE ACCESSORY TO THE MACHINE
B-56
c
Raise the presser foot lever.
d
Push the black button on the presser foot
holder and remove the presser foot.
a Black button
b Presser foot holder
→ Remove the presser foot from the presser foot
holder.
e
Use the included screwdriver to loosen the
screw of the presser foot holder, then
remove the presser foot holder.
a Screwdriver
b Presser foot holder
c Presser foot holder screw
→ Remove the presser foot holder.
f
Position the dual feed foot to the presser
foot bar by aligning the notch of the dual
feed foot to the large screw.
Side view
g
Hold the dual feed foot in place with your
right hand, then using the included
screwdriver securely tighten the large
screw.
h
Plug the connector of the dual feed foot
into the jack on the back of your machine.
i
Press to unlock all keys and
buttons.
→ All keys and operation buttons are unlocked, and
the previous screen is displayed.
CAUTION
• Use the included screwdriver to firmly tighten
the screw. If the screw is loose, the needle may
strike the presser foot and possibly cause
injury.