B-68 – Baby Lock Crescendo (BLCR) Instruction and Reference Guide User Manual

Page 70

Advertising
background image

USING SENSOR FUNCTIONS WITH SEWING STITCH

B-68

Specifying the Needle Drop
Position With the Sensor Pen

a

Turn on the machine.

b

Select a stitch pattern.

c

Press .

→ The sensor functions screen appears.

d

Press .

→ The reference position setting screen appears, and

the red guideline marker flashes at the machine’s
sewing position.

e

With the sensor pen, touch the location to
be specified as the needle drop position.

→ The guideline marker moves to the touched position

and flashes.

→ The distance from the left reference line to the

touched position appears in the reference position
setting screen.

→ The stitch preview on the upper left side of the

screen is updated according to the specified setting.

a Press to return the needle drop position to its

default setting.

b Press to stop specifying a setting with the sensor

pen.

Note

• If

is not available, the sewing

reference position cannot be specified with
the selected stitch pattern. Select a different
stitch pattern.

Note

• The following error message appears if the

area outside of the sensor pen touch range

is touched. Press

, and then touch

within the sensor pen touch range.

Memo

• The position can be precisely adjusted by

touching the adjustment areas with the
sensor pen.

• To change the setting, use the sensor pen

to touch the desired location for the
reference position.

a

b

Advertising
This manual is related to the following products: