Sewing reinforcement stitches, Automatic reinforcement stitching – Baby Lock Crescendo (BLCR) Instruction and Reference Guide User Manual

Page 79

Advertising
background image

SEWING

Se

w

ing
B

as

ic

s

Sewing S-5

S

1

a

Insert the foot controller plug into its jack
on the machine.

a Foot controller

b Foot controller jack

b

Slowly depress the foot controller to start
sewing.

c

Release the foot controller to stop the
machine.

Sewing Reinforcement Stitches

Reverse/reinforcement stitches are generally
necessary at the beginning and end of sewing. You
can use the “Reverse Stitch” button to sew
reverse/reinforcement stitches.

When you keep pressing the “Reinforcement
Stitch” button, the machine will sew reinforcement
stitch at that point 3 to 5 stitches, and then stop.

a “Reverse Stitch” button
b “Reinforcement Stitch” button

If the automatic reinforcement stitch is selected on
the screen, reverse stitches (or reinforcement
stitches) will be sewn automatically at the
beginning of sewing when the “Start/Stop” button
is pressed. Press the “Reverse Stitch” button or
“Reinforcement Stitch” button to sew reverse
stitches or reinforcement stitches automatically at
the end of sewing.

a Reverse stitch
b Reinforcement stitch

The operation performed when the button is
pressed differs depending on the selected pattern.
(Refer to the table in “Automatic Reinforcement
Stitching” on page S-5.)

Automatic Reinforcement
Stitching

After selecting a stitch pattern, turn on the
automatic reinforcement stitching function before
sewing, and the machine will automatically sew
reinforcement stitches (or reverse stitches,
depending on the stitch pattern) at the beginning
and end of sewing.

a

Select a stitch pattern.

Memo

• The speed that is set using the sewing

speed controller is the foot controller’s
maximum sewing speed.

Memo

• When you press the “Reinforcement Stitch”

button while sewing character/decorative
stitch pattern, you can end sewing with a
full stitch instead of at a mid-point.

• The green light on the right of the

“Reinforcement Stitch” button lights up
while the machine is sewing a full motif, and
it automatically turns off when the sewing is
stopped.

Advertising
This manual is related to the following products: