Baby Lock Crescendo (BLCR) Instruction and Reference Guide - Manual (Page 80)

SEWING
S-6
b
Press to set the automatic
reinforcement stitching function.
→ The key will display as
.
c
Set the fabric in the start position and start
sewing.
a Reverse stitches (or reinforcement stitches)
→ The machine will automatically sew reverse stitches
(or reinforcement stitches) and then continue
sewing.
d
Press the “Reverse Stitch” button or
“Reinforcement Stitch” button.
a Reverse stitches (or reinforcement stitches)
→ The machine will sew reverse stitches (or
reinforcement stitches) and stop.
The operation performed when the button is
pressed differs depending on the selected pattern.
Refer to the following table for details on the
operation that is performed when the button is
pressed.
Memo
• Some stitches, such as buttonholes and bar
tacks, require reinforcement stitches at the
beginning of sewing. If you select one of
these stitches, the machine will
automatically turn on this function (the key
appears as when the stitch is
selected).
Memo
• If you press the “Start/Stop” button to
pause sewing, press it again to continue.
The machine will not sew
reverse/reinforcement stitches again.
Memo
• To turn off the automatic reinforcement
stitching function, press again, so it
appears as .
“Reverse Stitch”
button
“Reinforcement
Stitch” button
+
Machine starts
sewing the stitches
and only sews reverse
stitches while holding
the “Reverse Stitch”
button. Machine starts
sewing the stitches
and sews 3 - 5
reinforcement
stitches while holding
the “Reinforcement
Stitch” button.
+ Machine starts
sewing the stitches
and only sews reverse
stitches while holding
the “Reverse Stitch”
button. Machine starts
sewing the stitches
and sews 3 - 5
reinforcement
stitches while holding
the “Reinforcement
Stitch” button.
+ Machine sews
reverse stitches at the
beginning and end of
sewing. Machine sews
reverse stitches at the
beginning and
reinforcement
stitches at the end of
sewing.
+ Machine sews
reinforcement
stitches at the
beginning and reverse
stitches at the end of
sewing. Machine sews
reinforcement
stitches at the
beginning and end of
sewing.